Acrylic top
Specifications
| Item | Supperior product | First class product | Quality product | ||||||
| Bar weight deviation g/m | ±0.60 | ±1.00 | ±2.00 | ||||||
| Bar weight unevenness rate % | ≤2.5 | ≤3.5 | ≤6.0 | ||||||
| Average length deviation rate % | ±5 | ±7 | ±10 | ||||||
| Long rate | 1.32dtex-2.44dtex(≥200mm) | ≤0.3 | ≤0.5 | ≤1.0 | |||||
| >2.44dtex, ≤3.33dtex (≥200mm) | ≤0.3 | ≤0.5 | ≤1.0 | ||||||
| >3.33dtex, ≤6.67dtex (≥210mm) | ≤0.4 | ≤0.8 | ≤1.6 | ||||||
| Short rate | ≤3.0 | ≤4.0 | ≤6.0 | ||||||
| Grain | 1.32dtex -2.44 dtex | ≤1.3 | ≤2.0 | ≤3.5 | |||||
| >2.44dtex, <3.33dtex ≥ | ≤0.6 | ≤1.0 | ≤3.0 | ||||||
| >3.33dtex, <6.67dtex | ≤0.3 | ≤0.8 | ≤2.0 | ||||||
| Fur | 1.32dtex-2.44dtex | ≤0.9 | ≤1.5 | ≤3.0 | |||||
| >2.44dtex, <3.33dtex ≥ | ≤0.4 | ≤0.5 | ≤1.5 | ||||||
| >3.33dtex, <6.67dtex | ≤0.3 | ≤0.5 | ≤1.2 | ||||||
Packing & Storage
| Packing | It is packed in composite plastic woven bags, with a single package quality of about 630kg; | |||||||
| Storage | Stored in a dry and ventilated warehouse and equipped with fire-fighting facilities; | |||||||
| Transportation | It can be transported by road, water, or railway. During the transportation, it should avoid mixing with other products, and avoid exposure to the sun and rain. | |||||||
Free Quote
At present, the company has more than 10 advanced production lines of the hollow glass microspheres with the annual production capacity of 15 thousand tons. To meet the demand of customers, the company can expand production capacity as soon as possible within 20 days. 6S principles Implemented in the production systems.
For samples, pricing, or more information, please call us at 0086 25 51192301 or mail to info@ascent-chem.com or fill out the following form. We will respond to you as soon as possible.
Tel: 0086 25 51192301
E-mail: info@ascent-chem.com
General Information
| Common Names | Acrylic top | |||||||
| Structure |  C5H9N |
|||||||
| CAS No. | 25014-41-9 | Boiling Point (℃) | 127.3±8.0 °C at 760 mmHg | |||||
| Molecular Weight | 83.132 | Melting Point (℃) | 317ºC | |||||
| Appearance | Fluffy and soft to the touch | Density | 0.8±0.1 g/cm3 | |||||
| LogP | 0.96 | Flash Point | 24.4±0.0 °C | |||||
| Water Solubility | Insoluble in water | Vapour Pressure | 11.2±0.2 mmHg at 25°C | |||||
| Safety Phrases | 24/25 | ||
| RIDADR | NONH for all modes of transport | ||
| WGK Germany | 3 | ||
| Personal Protective Equipment | Eyeshields;Gloves;type N95 (US);type P1 (EN143) respirator filter | ||
| RTECS | AT6977900 | ||
| FIRST AID | |
| Inhalation | If inhaled, move the patient to fresh air. If breathing stops, perform artificial respiration. |
| Skin | Rinse with soap and plenty of water. |
| Eyes | Rinse your eyes with water as a precaution. |
| Ingestion | Never feed anything through the mouth to the unconscious person. Rinse your mouth with water. |
The temperature is 80, which is mechanically curled by an extrusion curling machine, and then dried under 80 by a secondary oiling and curtain dryer to make the tow water content <2%, and then sent to cut off. The cutting length can be from 38 mm to 150mm as needed. After cutting off, the tow is sent to the hydraulic baler for packing. The 12% to 27% ZnCI2 from the spinning bath is mixed with a dilute solvent, first through a filter to remove impurities, and then into a thin film evaporator to remove unreacted monomers.The separated monomer comes out of the gas phase and is distilled and sent to the polymerization process for reuse.The liquid phase increased by 35% to 40% ZnCI2, and was transferred to the evaporator for further concentration, and finally 55% to 60% ZnCI2 agent was prepared. The crude solvent can be adjusted to PH 5 with NaOH, and H2O2 is added to oxidize and precipitate heavy metals (mainly iron), which are removed by filtration.
Frequently Asked Questions
Contact Us
TEL: 0086 25 51192301
EMAIL: info@ascent-chem.com
EMAIL: sophiahoney247@gmail.com
Copyright © Ascent Sbr All Rights Reserved.